HOW TO FIND OUT YOUR BRACELET SIZE
Similar to choosing your ring size, you can determine your correct bangle size by measuring your wrist or hand. A bangle, which is a rigid style generally designed to slip on, you'll need to allow some extra space.
MEASURE YOUR WRIST
-
Cut a piece string or paper to a length of around 20 - 25cm.
-
Wrap the string around your wrist, just above your wrist bone. Pull until it sits comfortably - not too tight, but not so loose that it could slip over your hand. Personal preference will also come into play here, depending whether you want a closer fit or a loose fit to be slung low over your hand.
-
Use a pen to mark the overlapping parts of the string or paper.
-
Lay the string/paper out flat against a ruler or tape measure, and measure between the end of the string and the point you have marked.
This measurement provides your wrist circumference.
Please note, if you're shopping for a bangle which is designed to slip on and doesn't feature a hinge to open and close, you'll need to allow a little extra space for your bangle to slip over your hand.
Bangle Size Chart |
|||
|
Inner Diameter |
Length |
||
|
6.7 cm |
2.64" |
21cm |
8.27" |
|
6.5 cm |
2.56" |
20 cm |
7.87' |
|
6.3 cm |
2.48" |
19.7 cm |
7.76" |
|
6.2 cm |
2.44" |
19.4 cm |
7.64" |
|
6.1 cm |
2.40" |
19.1 cm |
7.52" |
|
6 cm |
2.36" |
18.8 cm |
7.40" |
|
5.7 cm |
2.24" |
17.9 cm |
7.05' |
|
4.5 cm |
1.77" |
14.1 cm |
5.55" |
|
4.1 cm |
1.61" |
12.8 cm |
5.04" |
